Supplier Arduino Surabaya | RFID NFC PN532 Shield IDR 350.000. Pusat arduino online ke seluruh wilayah nusantara meliputi surabaya,malang,yogya,dll. Hub YUWONO-085815141953 | BBM-7625F2BB

 

The perfect tool for any 13.56MHz RFID or NFC application. This NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use!

NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones

Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other NXP MiFare type tags)

This shield was designed by RF engineers using the best test equipment to create a layout and antenna with 10cm (4 inch) range, the maximum range possible using the 13.56MHz technology. You can easily attach the shield behind a plastic plate with standoffs and still read cards through a (non-metal) barrier.

This shield is designed to use I2C or SPI communication protocols. I2C is the default, as it uses fewer pins: analog 4 and 5 are used for I2C (of course you can still connect other I2C devices to the bus). Digital #2 is used for "interrupt" notification. This means you don't have to sit there and 'poll' the chip to ask if a target tag has been found, the pin will pull low when a card, phone, etc is within range. You can adjust which pin is used if you need to keep dig

Shield yang kami sediakan antara lain :

Kami merupakan Importir atau supplier arduino murah nomor 1 di Indonesia. Kami menjual secara grosir arduino board, shield arduino, modul arduino, arduino learning kit, arduino project, sensor murah, dan komponen elektronika lainnya. Arduino yang kami tawarkan kali ini merupakan arduino clone yang memiliki kemampuan sama seperti aslinya. Toko arduino online kami melayani penjualan ke seluruh kota-kota besar seperti Surabaya, Malang, Jakarta, Bandung, Bogor, Bekasi, Yogyakarta, Semarang, Solo, Bali, Denpasar, Medan, Palembang, Lampung, Samarinda, Pontianak, Banjarmasin, Batam, Balikpapan, Manado, Kendari, Palu, Irian Jaya, dan kota-kota lainnya di seluruh nusantara.
Kami juga membuka jasa pembuatan project-project elektronika.
Segera hubungi Customers Service kami, YUWONO-085815141953 | BBM-7625F2BB.

TERIMA KASIH ATAS KUNJUNGAN ANDA
Kami juga melayani jasa project elektronika, mulai dari kategori industri, universitas, perkantoran, edukasi, dan lain-lain. Kami sudah berpengalaman di bidang ini. Kami tunggu pesanan Anda ^_^